Figure 56 Multi-Copy (Including Snapopc+); Figure 57 Multi-Copy (Using The Consistency Mode) - Fujitsu ETERNUS AF250 Design Manual

1. Function
Backup (Advanced Copy)
For a SnapOPC+, the maximum number of SnapOPC+ copy session generations can be set for a single copy
source area when seven or less multi-copy sessions are already set.

Figure 56 Multi-Copy (Including SnapOPC+)

Copy
destination 1
Copy
destination 3
Copy
destination 4
Copy destination (SnapOPC+ generation data)
Note that when the Consistency mode is used, a multi-copy from a single copy source area to two or more copy
destination areas in a single copy destination storage system cannot be performed. Even though multiple multi-
copy destinations cannot be set in the same storage system, a multi-copy from the same copy source area to
different copy destination storage systems can be performed.

Figure 57 Multi-Copy (Using the Consistency Mode)

ETERNUS DX/AF
Copy source
ETERNUS DX/AF
Copy
destination 2
Copy source
ETERNUS DX/AF
REC (Consistency)
Copy
destination 1
Copy
REC (Consistency)
destination 2
ETERNUS DX/AF
REC (Consistency)
Copy
destination 3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
ETERNUS DX/AF
Copy
destination 5
Copy
destination 6
ETERNUS DX/AF
Copy
destination 7
95
P3AG-1822-09ENZ0