Figure 68 Connection Example With A Dedicated Remote Support Port - Fujitsu ETERNUS DX60 S4 Design Manual

2. Connection Configuration
LAN Connection
■
Connection Configurations
For the ETERNUS DX, two IP addresses are required (one IP address for the MNT port and one IP address for the
RMT port).

Figure 68 Connection Example with a Dedicated Remote Support Port

Administration
terminal
IP address C
Different LANs are used for MNT ports and RMT ports.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic)
SNMP
E-mail server
manager
LAN switch
IP address A
CM#0
Controller enclosure
ETERNUS DX
Copyright 2019 FUJITSU LIMITED
NTP server
Authentication
Syslog server
server
LAN for operation management
CM#1
Remote support
center
111
Router
P3AM-8992-14ENZ0