3. Connection Configuration
LAN Connection
LAN for Remote Support
When the network connection for the remote support needs to be separated from the company LAN, use the
RMT ports to connect to the remote support center via a different network.
■
Connection Configuration
For the ETERNUS AF, two IP addresses are required (one IP address for the MNT port and one IP address for the
RMT port).
Figure 82
Connection Example with a Dedicated Remote Support Port
Administration
terminal
LAN switch
IP address C
IP address A
Different LANs are used for MNT ports and RMT ports.
SNMP
E-mail server
manager
Syslog server
LAN for operation management
CM#0
CM#1
Controller enclosure
ETERNUS AF
NTP server
Authentication
server
Router
Remote support
center
139
Design Guide