Figure 26 Tpv/Ftv Capacity Optimization - Fujitsu ETERNUS AF250 Design Manual

All-flash arrays
Hide thumbs Also See for ETERNUS AF250:
Table of Contents

Advertisement

1.
Function
Operations Optimization (Deduplication/Compression and Storage Virtualization)
TPV/FTV Capacity Optimization
TPV/FTV capacity optimization can increase the unallocated areas in a pool (TPP/FTRP) by changing the physical
areas where 0 is allocated for all of the data to unallocated areas. This improves functional efficiency.
Once an area is physically allocated to a TPV/FTV, the area is never automatically released.
If operations are performed when all of the areas are physically allocated, the used areas that are recognized by
a server and the areas that are actually allocated might have different sizes.
The following operations are examples of operations that create allocated physical areas with sequential data to
which only 0 is allocated:
Restoration of data for RAW image backup
RAID Migration from Standard volumes to TPVs/FTVs
Creation of a file system in which writing is performed to the entire area
The TPV/FTV capacity optimization function belongs to Thin Provisioning. This function can be started after a tar-
get TPV/FTV is selected via ETERNUS Web GUI or ETERNUS CLI. This function is also available when the RAID Mi-
gration destination is a TPP or an FTRP.
TPV/FTV capacity optimization reads and checks the data in each allocated area for the Thin Provisioning func-
tion. This function releases the allocated physical areas to unallocated areas if data that contains all zeros is
detected.

Figure 26 TPV/FTV Capacity Optimization

Before the process
After the process
TPV/FTV capacity optimization may not be available when other functions are being used in the device or the
target volume.
For details on the functions that can be executed simultaneously, refer to
Available for Simultaneous Executions" (page
TPV / FTV
0
LBA0
Release
TPV / FTV
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
Check
0
Release
*1: The allocated capacity varies depending on the TPP/FTRP capacity.
: Physically allocated area (data other than ALL0 data)
: Physically allocated area (ALL0 data)
: Unallocated area
167).
51
0
0
Release
Release
21MB (*1)
"Combinations of Functions That Are
P3AG-1822-09ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus af250 s2

Table of Contents