Instructions For Use (Qualified Personnel) - Otto Bock 21A47 Instructions For Use Manual

4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.
4.3 General safety instructions
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Clean the product only as described in the section "Cleaning and care" (see Page 19).
NOTICE
Improper assembly/disassembly of the product
Damage to the product.
► Observe the process steps, instructions and required tools in the section "Preparation for
use".
► Instruct the patient in the proper disassembly/ assembly of the product.
NOTICE
Independent user changes or modifications made to the product
Damage to the product.
► Manipulations to the product other than the tasks described in these instructions for use are
not permitted.
5 Scope of Delivery and Accessories
• 1 pc. Transhumeral soft harness L/R
• 1 pc. Sewing silk (100 m)
• 1 pc. 647G1279 Instructions for use (qualified personnel)
• 1 pc. 647G1267 instructions for use (user)
14