Versions And Data (Only In Menu Mode "Professional") - Fasel Elektronik FCU2000-IR series Operating Manual

„Basic settings" menu
7.
8.
9.
10. Select program step. Digit flashes.
11. Press the
12. Exit the menu using the
13. Adjust duration. Last digit flashes.
14. Press the
15. Exit the menu using the
16. Select adjusted colour. Cursor flashes. Select one or two (mixed colour) colour
17. Press the
18. Exit the menu using the
7.3

Versions and data (only in menu mode "Professional")

This menu (only available in professional mode!) is used for service to, for e.g., quickly
find the cause of fault with the versions given here. (only in menu option "Professional").
1.
2. Press the






32
Select colour program no. Cursor flashes on the selected line.
Press the key. Increase value.
Press the key: Reduce value.
Press the key. The selection is saved.
Exit the menu using the
Press the key. Increase value.
Press the key: Reduce value.
16 program steps are possible.
key. The selection is saved.
Press the key. Increase value.
Press the key: Reduce value.
Press the key: Move cursor to the left.
Press the key: Move cursor to the right.
A maximum duration of 32 minutes is possible.
Important!
If you enter "0", the colour light programme automatically goes back to programme
step no. 1 during the programme run, i.e. after you enter the colour combination for
the last programme step, you must enter a "0" in the next programme step.
key. The selection is saved.
lights with the or key. The following combinations are possible:
– 1 / 1 + 2 / 2 / 2 + 3 / 3 / 3 + 4 and 4
key. The selection is saved.
Press (basic settings)
key until the following view is shown:
Operating manual Series FCU2000/3000/4000-IR
key or select the next line with the
key or select the next line with the
key or select the next line with the
key.
key. The lamp next to the key must light up.


or key.
or key.
or key.
B_FCUxxxx-IR / Version V 1.07