Table of Contents
Advertisement
6
"General settings" menu
6.1.1
Select or start the mode
Mode
1.
select or start
2.
3.
Key
Table 5: Mode control keys
6.2
Adjust "Infrared" mode
The control unit is turned on.
1.
2.
3.
4.
5.
6.
7.
8.
9.
B_FCUxxxx-IR / Version V 1.07
Turn on Infrared control according to chapter 5.2.1.
The green lamp flashes.
Press the key for Infrared mode. The desired mode has been started only when the
green lamp stops flashing.
NOTE!
There are two menu navigations available for the control unit. All the
menus are displayed only in the "Professional" menu. These menus are
indicated accordingly in this chapter. If these menus are not displayed,
your control has been set to the "Small" menu
Furthermore, the control unit can be equipped with extension boards
like for e.g. for aroma feeding. This requires additional menus, which
are indicated accordingly in this chapter. For information about the fit-
tings of your control unit, please contact the installer or the dealer of
your infrared system.
Press the key
(infrared mode). The lamp next to the key must flash or light up.
The symbol
(adjust the temperature) lights up. → See Page 17, chapter 6.3
Press the
botton.
The symbol
(adjust heating /
Depending on the status of the lamp next to the mode key, adjust the heating time
or the remaining heating time. → See page 17, chapter 6.3
Press the
key.
Optional: "Adjust colour light mode" view is displayed.
Press the
key.
Press the
key. The "Infrared" view is displayed again.
NOTE!
If the key is not operated for a few seconds, the program automatically
switches back to the "main" view. (If the controller has a timer and it is
active, he switches into the timer menu.)
Operating manual Series FCU2000/3000/4000-IR
"General settings" menu
Description
Infrared mode
remaining heating time) lights up.
17
Advertisement
Table of Contents
