Miele DO 7860 Operating And Installation Instructions page 108

Problem solving guide
Problem
During a cooking pro-
gramme with an M Chef
function, the cooling fan
is running with a very
high spin speed.
A noise can be heard
after a cooking pro-
gramme.
The Dialog oven has
switched itself off.
The food is unevenly
cooked.
Cakes/biscuits are not
cooked properly after
the duration given in the
cooking chart.
108
Cause and remedy
The Dialog oven can get much hotter when using
M Chef functions than it does with conventional
cooking functions. The spin speed will reduce
automatically at the end of the cooking programme.
 If it happens too frequently, check that the
appliance is correctly installed (see "Installation").
With very small amounts of food in the oven (e.g.
baking 2 rolls) the Dialog oven will heat up more than
it would with larger amounts of food.
 It is better to cook larger amounts of food.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
The Dialog oven will switch itself off automatically to
save energy if no other action is taken within a
certain time frame after switching it on or after the
end of a cooking programme.
 Switch the Dialog oven back on again.
If food has browned too much in certain places, the
temperature selected was too high.
 Select a lower temperature.
If there are hard bits or dry areas on the food, the
intensity was set too high.
 Set a lower intensity level or set few Gourmet
units.
A different temperature from the one given in the
recipe was used.
 Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
 Check whether you amended the recipe. The
addition of more liquid or more eggs makes a
moister mix which requires a longer cooking
duration.