Ipx Packet Types; Filter - Black Box LRA001A-R2 User Manual

3.5 IPX Packet Types

The packet type indicates the type of service offered or required by the packet. Table B-3 list the packet
types defined in NetWare.
Field Value
00h
01h
04h
05h
11h
14h

3.6 filter

Filter IPX packets using the general filter list
Syntax
filter add name{
filter delete name
filter {enable | disable}
filter flush
filter move name [{before | after} existing_name]
filter status
Description
Use packet filtering to make your Router more secure, or to decrease throughput. The filters allow IPX
traffic to be selectively restricted to and through the Router. You can also use filters to keep hosts outside
of your organization from initiating calls on your phone line and increasing your phone bills. There are
three IPX filter lists:
• General (filter command)
• RIP (ripfilter command)
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
Table B-3. IPX Packet Types.
Packet Type
unknown
routing information
service advertising
sequenced
NetWare core protocol
PP (propagated packet)
[-i iface [ /frame_type ]]
[-s src_addr]
[-d dest_addr]
[-p pkt_type]
{-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
Description
for all unclassified packets
for RIP packets
for SAP packets
for SPX packets
for NCP packets
for Novell NetBIOS
}
191