Black Box LRA001A-R2 User Manual page 68

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER'S MANUAL
If the name or link password of a Router (or other router) changes, all remote system
password files that it logs into must be changed, or the authentication handshake will
fail.
Names and link passwords are specified during the initial configuration of the Router. To change the
name or link password later, use the config modify or the password commands . The names and link
passwords at local and remote sites must correspond exactly, in order to successfully connect the two
sites.
Figure A-3 shows the name and link password relationships between local and remote sites, as they
would be specified during the initial configuration of those sites.
This system: This system:
Name ( Async Router ) : paris
-
-
-
Link Password ( ) : all2paris
Remote site information:
Name ( Async Router ) : hamburg
-
-
-
Link password ( ) : ham2paris
Figure A-3. Entering Names and Passwords During Initial Configuration.
68
Paris
NOTE
This system: This system:
Name ( Async Router ) : hamburg
-
-
-
Link Password ( ) : ham2paris
Remote site information:
Name ( Async Router) : paris
-
-
-
Link password ( ) : all2parts
Hamburg