Generic Commands - Black Box LRA001A-R2 User Manual

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
ethN/II
ethN/SNAP
ethN/802.2
modem N
sync0

1.3 Generic Commands

?
access shift shiftstart shiftstop [MTWRFSU]
access shift 0
access shift
asystat [iface [iface] ...]
authenticate add server host[:port]
authenticate delete server host
authenticate method {radius | securid | local}
authenticate retry count
authenticate show [securid]
authenticate test user-id
authenticate timeout value_in_seconds
client add [-e] [clientname]
client delete [all | clientname]
client list [clientname]
client modify [clientname]
config firewall iface
config modify
config reset
config save
config show
date [yymmddhhmm[.ss]]
default_mode [{ ipx | tcp/ip}]
Line mode dialer commands
dialup iface client [dummy secs]
dialup iface demand phone# [secs]
dialup iface demand_backoff phone# [secs]
dialup iface leased_answer
dialup iface leased_originate
Other dialer commands
dialup iface backup add phone#
dialup iface backup delete phone#
dialup iface backup primary [on | off]
dialup iface dial_log [flush]
142
Ethernet N interface, Ethernet Type II frame type
Ethernet N interface, 802.3 SNAP frame type
Ethernet N interface, 802.3 LLC frame type
Modem N interface; modems are numbered from 0 to 4, depending on your
Router model. See the User's guide for details.
Synchronous interface (Sync Router only)
Display mode (TCP/IP or IPX) command summary
Time is in hhmm format
Sets Router's primary shift time
Display interface statistics
Display or change authentication
method for clients
Display/edit client information
Modify/display Router configuration
Display/set date
Display/set default protocol mode for
commands at login