Routervu Commands; Synopsis; Subcommands; Examples - Black Box LRA001A-R2 User Manual

RouterVu enables users on IPX networks to log into and configure the Router remotely. RouterVu is a
client/server application, with the client code running in DOS on a PC, and the server code running on
the Router.
RouterVu commands can only be used on a PC-DOS or compatible computer. Do not enter RouterVu
commands on the Router console.
The RouterVu utility works over IPX networks. Using RouterVu from a PC, you can:
• configure local Routers using a PC on the local Ethernet
• configure remote Routers
• troubleshoot network problems from both ends (Routers)
You can select a specific Router by name or by IPX address (network number).
1.6.1 S
YNOPSIS
routervu name | address
routervu -n
routervu -a
routervu -p {name | address} Pings once to Router specified
routervu -o filename
routervu
1.6.2 S
UBCOMMANDS
routervu
Displays routervu command syntax.
routervu name
Establishes an interactive session with a Router called name.
routervu -n
Displays the names of all connected Routers.
routervu -a
Displays the names of all connected Routers and servers.
routervu -p {name | address}
Pings once to the Router specified. Ping sends echo packets over the network to solicit a response from
a Router or Netware server, thereby determining connectivity.
routervu -o filename
Saves the keystrokes to the script file filename.
1.6.3 E
XAMPLES
• Display routervu command syntax.
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
Establishes interactive session with specified
Displays all Routers on network
Displays all Routers and servers on network
Saves keystrokes to script file specified
Displays routervu command syntax
149