Default_Mode - Black Box LRA001A-R2 User Manual

Enter values for the year, month, day, hour, minutes and seconds:
final two digits of the year, for example, 1996 is 96
yy
mm the month number (1-12), for example, October is 10
dd the day number in the month, 1-31
is the hour number in a 24-hour system
hh
mm (second) the second mm is the minute number
specifies seconds and is optional
.ss
The year, month, and day may be omitted. The current values are derived from the host clock and
supplied as defaults.
Examples
date 10080045
Sets the date to Oct 8, 12:45 AM.

2.8 default_mode

Sets or displays the default login command protocol mode
Syntax
default_mode [{ipx | tcp/ip}]
Description
Sets or displays the mode Router users access by default when they log in. Entered with no argument,
this command displays the current setting. The mode can be changed with the tcpip command.
Subcommands and parameters
default_mode [{ipx | tcp/ip}]
ipx For an IPX network. This is the default.
tcp/ip For a TCP/IP network
config [reset | modify] sets the default start-up mode using the default_mode
command. The algorithm used specifies that if IP routing is enabled, the default mode
is "tcp/ip" otherwise, the default mode is ipx.
See also
config [reset | modify]
ipx
tcpip
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
NOTE
163