Modem Parameters - Black Box LRA001A-R2 User Manual

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER'S MANUAL
To use a SecurID or RADIUS server, your network must use the TCP/IP protocols.
If you want to use a SecurID server...
You must have a SecurID card that is configured with a username on the SecurID server. At the end of
the Router's configuration script, you will be prompted through a process where you will be validated by
the SecurID server for the first time. You will need your SecurID card and its associated username at that
time. During normal operations, a SecurID user must provide a valid username (defined on the SecurID
server), a numeric code shown on the card's LCD display, and an optional PIN number defined by the
user.
If you want to use a RADIUS server...
You must have the username(s) and IP address(es) of the RADIUS server(s) that you wish to use.
The Router will prompt you to provide the name(s) and password(s) configured on those server(s).
5.4.3 M P
ODEM ARAMETERS
• modem0—The first modem interface.
• modem1—The second modem interface (Async Router AR-5 only).
• modem2—The third modem interface (Async Router AR-5 only).
• modem3—The fourth modem interface (Async Router AR-5 only).
• modem4—The fifth modem interface (Async Router AR-5 only).
• type of system—Select the type of remote system to be connected to the Router via the modem port.
Typically, this remote system is a Router or a remote client, but can also be a Livingston Portmaster,
Telebit NetBlazer
®
• Phone #—Enter the telephone number of the remote system. The telephone number must begin
with a numeral and may contain special characters, such as commas, to indicate a pause. For more
information, refer to the Reference Guide.
50
Table 5-2. Domain Name Suffix Types.
Suffix
com
edu
gov
mil
net
org
(country code)
, or other similar system.
®
NOTE
Organization Type
Commercial organizations
Educational institutions
Government facilities
Military groups
Major network support centers
Other organizations
Country other than USA