Ipx-Only Commands - Black Box LRA001A-R2 User Manual

version
who

1.4 IPX-only Commands

filter add name
filter delete name
filter {enable | disable}
filter flush
filter move name [{before | after} existing_name]
filter status
ifconfig [iface[/frame_type] [network net_number] [{up | down}] ]
ifconfig iface [speed [bps]]
ifconfig [iface [linkaddr directory_number [/SPID]
ipx broadcast
ipx internal_net [internal_net_number]
ipx optimize [on | off]
ipx priority
ipx routing [{enable | disable}]
ipx spx
ipx trace
netstat [-m] [-p {ipx | rip | sap | pburst}] [-s]
ping server_name
ping router_name
ping network.node_address
ping -s {server_name | router_name | network.node_address} [count ]
ripfilter add name
ripfilter delete name
ripfilter {enable | disable}
ripfilter flush
ripfilter move name [{before | after} existing_name]
ripfilter status
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
Display Router's software version number
Display information about logged-in users
{ [-i iface[/frame_type]]
[-s src_addr ]
[-d dest_addr]
[-p pkt_type]
-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
{ [-i iface [/frame_type] ]
[-q query_type]
[-n network]
-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
[-h {hopcount}]
Configure/display RIP filters
}
Configure/display IPX filters
Configure interface for IPX
] ]
Configure interface to assign isdn
address and distinguishes between
multipoint and point-to-point
connection via SPID assignment
Display/configure IPX protocol parameters
Display IPX network statistics
Send diagnostic packets to test operation
of remote Routers, clients or servers
}
145