Connect Host - Black Box LRA001A-R2 User Manual

Once you connect Router cables as described in Chapter 3, either:
• connect a host (PC workstation or serial terminal) to install and configure software as described in
Chapters 4, 5, and 6, or
• insert the previously configured boot diskette provided by your system administrator into the
Router's diskette drive and proceed to Chapter 6.
2
3
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER'S MANUAL

4. Connect Host

Ethernet Hub
Host
IP
telnet
IPX
RouterVu
Figure 4-1. Five Methods to Configure the Router Software.
10BASE-T, AUI
CONSOLE
Host
4
Serial terminal utility
(terminal emulation)
5
Serial terminal
Router
1
Previously
configured boot
diskette
25