Led Descriptions; Async Router Ar-P Leds - Black Box LRA001A-R2 User Manual

- Remote server not found (IPX) (Section C.4.6)
- No connection slots available (IPX) (Section C.4.7)
- Misconfigured networks (IPX) (Section C.4.8)
• Client operating problems (Section C.5)
- Router does not answer when client calls (Section C.5.1)
- Router answers client call but connection fails (Section C.5.2)
C.1 LED descriptions
C.1.1 A R AR-P LED
SYNC OUTER
Table C-1. Descriptions of the LEDs on the Async Router AR-P.
Label
PWR
ERR
LNK
NWK or NET
connection
DTR
DCD
TX
RX
All LED lamps light as they are tested when the Router starts. They remain lit for 10 seconds before
resuming normal operation.
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER'S MANUAL
S
Figure C-1. LEDs on the Async Router AR-P.
Indicates
Power
Error
Link status
Network activity
Data terminal ready
Data carrier detect
Transmit
Receive
If the LED is on
Router is receiving power
System error is detected
Ethernet connection is functional
Router is receiving or transmitting data over Ethernet
Modem0 is ready to transmit
Modem0 is receiving carrier signal from remote modem
Modem0 is transmitting
Modem0 is receiving
83