Interface Status; Compression Method Selection; Lcp Negotiation - Black Box LRA001A-R2 User Manual

Async router ar-p async router ar-5 sync router
Table of Contents

Advertisement

on—the specified value will be negotiated
off—the specified value will not be negotiated
2.18.1 I
S
NTERFACE
TATUS
ppp i&g_iface
Current status of an interface - With no other parameters, the ppp iface command issued as shown above
displays the current PPP status of the interface iface you specify.
2.18.2 C
M
OMPRESSION
ppp i&g_iface ccp {local | remote} method
[stacker | history num | none | allow [on | off]]
method—Displays or sets the compression method used for outgoing packets on the Router.
stacker—Selects the Stacker™ algorithms to be used to compress outgoing packets.
history num—Compression can be turned on with history, or without history. History 1 turns on
compression; history 0 turns off compression. Compression without history compresses each packet
based upon that packet only. Compression with history compresses packets based upon the packet
itself, and previous types of packets. History allows the box to be more efficient when handling
packets that are identical.
none—Selects no compression to be used on outgoing packets.
2.18.3 LCP N
EGOTIATION
ppp iface lcp {local | remote} accm
[bitmap | allow [on | off]]
Displays or sets the desired Asynchronous Control Character Map (ACCM).
Specify the bitmap in octets. The default is 0xffffffff.
bitmap
ppp iface lcp {local | remote} authentication
[chap | pap | none | allow [on | off]]
Displays or sets the authentication protocol. The default is none. Use local when you want the remote
end to authenticate itself using the specified protocol. Use none when the remote end does not have to
authenticate itself.
Use remote to suggest to the remote end that you authenticate yourself to it using the specified protocol
or by suggesting that you not authenticate yourself at all if none was set. The remote end is free to ignore
your suggestion. The acceptable authentication protocols are CHAP and PAP. The challenge handshake
authentication protocol verifies the identity of a peer using a three-way handshake when establishing a link.
The password authentication protocol verifies the identity of a peer using a two-way handshake when
establishing a link. Because passwords are sent over the circuit in a text format (unencrypted), PAP is not
as secure as CHAP.
Selects challenge handshake authentication protocol
chap
pap
Selects password authentication protocol
none
No authentication occurs when the point-to-point connection establishes a link.
This is the default setting.
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
S
ETHOD
ELECTION
177

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lra005a-r2Lrs002a-r2Ar-pAr-5

Table of Contents

Save PDF