Table 5-1 Preventative Maintenance Actions And Schedule - Carrier RG2059 Series Operation And Service

Procedure
1. Check (in place) Engine/Generator shock mounts for
cracks, cuts, abrasion or flaring
2. Check engine lubrication oil and fuel lines, filters and con-
nections for leaks.
3. Check engine lubrication oil level, add as required.
4. Check Poly Vbelt for fraying or cracking, replace as
required.
5. Check radiator hoses for leaks.
6. Check coolant level add 50/50 mix as required.
7. Check radiator coil and generator air intake for cleanliness.
8. Check Air Cleaner:
For Oil bath air filter:
Check for cleanliness and clean filter body and internal mesh.
Change oil every 250 hours.
For Dry element air cleaner:
Check for cleanliness and clean/replace as filter indicator indi-
cates
9. Drain Water from fuel tank sump.
10.Drain Water from fuel filter bowl.
11. Fill fuel tank with diesel fuel, check fuel gauge operation.
12.Check intake heater amperage.
13.Check battery terminals for tightness and cleanliness.
14.Check for dirty loose electrical connections, frayed cables
and cracked insulation.
15.Check and tighten as required all hardware, brackets etc.
16.Clean mechanical fuel lift pump internal filter.
17.Change in line fuel filter (option).
18.Clean and coat terminals with battery terminal sealant.
19.Change lubricating oil and filters (See NOTES)
20.Tighten engine and generator mounting bolts.
21.Tighten all electrical connections in control box.
T-361
Table 5–1 Preventative Maintenance Actions and Schedule
Manual
Reference Pre-Trip
Section
5.7.2
-
Section
2.11
Section
5.5.10
-
Section
2.11
Section
5.5.5
Section
5.5.10
Section
5.5.10
-
-
Section
2.11
Section
5.5.15
-
-
-
Section
5.5.2
Section
5.5.4
-
Section
5.5.6
Section
5.7.2
-
5–18
Every
During 2000
1
hours of hours of
2
service service
X X
X X
X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X
X
X
X
X
X
Every
4000
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X