Specific Hazard Statements - Carrier RG2059 Series Operation And Service

1.6

SPECIFIC HAZARD STATEMENTS

The statements that follow are applicable to the generator set and appear elsewhere in this manual. These recom-
mended precautions must be understood and applied during operation and maintenance of the equipment covered
herein.
To prevent injury, the procedures provided for installation and removal of the generator set
must be followed carefully.
Disconnect power plug before removing generator set.
To prevent injury, the procedures provided for installation and removal of the generator set
must be followed carefully.
Double-check that the generator set clamp (B) is securely tightened against the face of the cor-
ner casting and that the generator set clamp hand nut is tight before transporting the con-
tainer. A loose fit could cause damage to both the generator set and the generator set clamp,
and cause serious injury during transport.
Disconnect power plug before removing generator set.
Beware of moving poly V-belt, belt driven components and hot exhaust components.
Under no circumstances should ether or any other unauthorized starting aids be used in con-
junction with the air intake heater.
Beware of pinch points.
Do not use gasoline to clean air cleaner parts.
Do not direct water or steam into the generator openings. Do not allow any soap and water
solutions to enter the alternator.
T-361
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
1–2