Table 4-1 Preventative Maintenance Actions And Schedule - Carrier TRANSICOLD 69UG15 Series Operation And Service

Diesel driven generator set

Hide thumbs

Table Of Contents

Table of Contents

Description of Procedure

For Pre-Trip inspection, perform items 1 through 15; for "After Start-up" checks, perform items 32 through 36.

1. Check (In Place) engine/generator shockmounts for cracks, cuts, abrasion or flaring

2. Check engine lubrication, fuel filter, and connections for leaks

3. Check engine lubrication oil level, add as required

4. Check poly V-Belt for fraying or cracks

5. Check radiator hoses for leaks, check coolant level and 50/50 mixture

6. Check radiator coil and generator air intake for cleanliness

(Clean using compressed air, reversing air flow direction)

7. Check air cleaner

7a. Oil bath air filter: Check for cleanliness and clean filter body and internal mesh.

Change oil every 250 hours

7b. Dry element air filter with indicator: Check for cleanliness and clean/replace

as air filter indicator indicates

8. Drain water from fuel tank sump and fuel filter bowl

9. Fill fuel tank with diesel fuel; check fuel gauge operation

10.Check intake heater amperage

11. Check battery terminals for tightness and cleanliness. Clean and coat terminals with

battery terminal sealant

12.Check for dirty/loose electrical connections, frayed cables/wires and cracked insulation

13.Tighten all hardware (brackets, etc.)

14.Clean oil bath air filter body and internal mesh (See Note 2)

15.Clean mechanical fuel lift pump internal filter

16.Change lubricating oil and filter(s) (See Note 1)

17.Tighten engine and generator mounting bolts

18.Tighten all electrical connections in the control box

19.Verify operation of engine protective devices