Figure 5.17 Unidrive Torque Requirements - Carrier RG2059 Series Operation And Service

ENGINE & GENERATOR
SHOCKMOUNTS
3/8-16 x 1-1/4 lg - SST
31 + 3.7 ft.-lb (42.03Nm)
1/2-13 x 3 lg - SST
75 + 9.4 ft.-lb (101.69Nm)
* After torquing mark each with a
permanent marker and bend tabs

Figure 5.17 Unidrive Torque Requirements

5/8-18 x 2.25 lg - SST
92.5 + 9.2 ft.-lb (125.41Nm)
3/8-16 x 1.75 lg - SAE 5
(6 Req'd) 30 ft-lb + 3 ft-lb
(40.67Nm)*
ENGINE MOUNT
UNIDRIVE
M8 x 25MM lg - SST
19 + 2 ft.-lb (25.76Nm)
5–17
5/8-11 x 4.00lg - SST
92.5 + 9.2 ft-lb (125.41Nm)
Engine Flywheel
Generator Disc Drive
T-361