Series Attempt Number
Intake Heater Energized
in Seconds
Fuel Solenoid Engaged
Engine Crank Duration
(Seconds)
Engine
Rest
Duration
(Seconds)
Series Attempt Number
Intake Heater Energized
in Seconds
Fuel Solenoid Engaged
Engine Crank Duration
(Seconds)
Engine
Rest
Duration
(Seconds)
Series Attempt Number
Intake Heater Energized
in Seconds
Fuel Solenoid Engaged
Engine Crank Duration
(Seconds)
Engine
Rest
Duration
(Seconds)
Series Attempt Number
Intake Heater Energized
in Seconds
Fuel Solenoid Engaged
Engine Crank Duration
(Seconds)
Engine
Rest
Duration
(Seconds)
Table 2–3 Auto Restart Sequencing (Continued)
3
Engine Status:
If the engine starts:
30
1. Run sequence begins.
If the engine fails to start:
X
1. Intake heater will de-energize.
2. Fuel solenoid will de-energize.
Up to 15
3. Crank output will de-energize.
4. Overcrank LED will flash three times. Wait two seconds and
25
repeat.
5. Unit will rest five hours and proceed to the next series.
4
Engine Status:
If the engine starts:
30
1. Run sequence begins.
If the engine fails to start:
X
1. Intake heater will de-energize.
2. Fuel solenoid will de-energize.
Up to 15
3. Crank output will de-energize.
4. Overcrank LED will flash four times. Wait two seconds and repeat.
25
5. Unit will rest five hours and proceed to the next series.
5
Engine Status:
If the engine starts:
30
1. Run sequence begins.
If the engine fails to start:
X
1. Intake heater will de-energize.
2. Fuel solenoid will de-energize.
Up to 15
3. Crank output will de-energize.
4. Overcrank LED will flash five times. Wait two seconds and repeat.
25
5. Unit will rest five hours and proceed to the next series.
Engine Status:
6
If the engine starts:
30
1. Run sequence begins.
If the engine fails to start:
X
1. Intake heater will de-energize.
2. Fuel solenoid will de-energize.
Up to 15
3. Crank output will de-energize.
4. Overcrank LED will illuminate solid and lock out future crank
25
attempts.
5. To reset, turn unit power switch OFF and back ON..
2–9
T-361