Figure 5.16 Generator Shockmounts - Carrier RG2059 Series Operation And Service

Figure 5.16 Generator Shockmounts

Lock-nut (5/8)
GENERATOR
Plain Washer (5/8)
Screw (1/2)
Mounting Base
Screw (3/8)
Plain Washer (3/8)
Plain Washer (5/8)
Flat Washer (1/2)
Lock Washer (1/2)
Flat Washer
Shockmount
Plain Washer (3/8)
Lock-nut (3/8)
Screw (5/8)
INSTALL MOUNT WITH LARGER
FLARE AT TOP AS SHOWN
Shockmount
Mounting Base
FRAME
SST is an abbreviation for 300 Series Corrosion Resistant Steel.
Loctite #242 or an equivalent product should be used on ALL hardware shown in Figure 5.17.
T-361 5–16