Powering Up The Console - Abbott CentriMag Operation Manual

CAUTION
The vertical pole used to mount the Motor has to be stable. Mounting the Motor
to unstable objects may lead to personal injury and/or property damage.
CAUTION
Do not mount the Motor Bracket on a horizontal pole to avoid injury or damage
to the equipment. Mount the Motor Bracket only on vertical poles.

7.5 Powering Up the Console

To power up the main or backup console:
1. Insert the Power Cord into the AC Power Connection located on the back of the
Console. Flip and press the connector latching mechanism over the base of the power
connector in order to fully secure the power cord to the Console.
2. Insert the cord into the AC wall outlet.
WARNING
Insert the cord into the AC wall outlet only. Do not use power strips and socket
extensions. In the BVAD configuration, both Console power cords must be
inserted directly into an AC wall outlet.
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Page 59 of 126