Entering The Pressure Menu; Setting The Max Or Min Pressure Alert Settings For The P1 Transducer - Abbott CentriMag Operation Manual

7.11 Entering the Pressure Menu

Main Menu
Minimum Flow Alert
Maximum Flow Alert
Pressure Menu
Stopwatch*
* Monitor only
Extended Menu
If the pressure subsystem is active, the pressure menu can be accessed by pressing
ENTER, while the PRESSURE MENU option is highlighted. Activation and deactivation of
the pressure subsystem is explained in Section 7.14.

7.12 Setting the Max or Min Pressure Alert Settings for the P1 Transducer

Pressure Menu
Pressure Calibration
Minimum P1 Alert
Maximum P1 Alert
Minimum P2 Alert
Maximum P2 Alert
Setting the Max or Min Pressure Alert Settings for the P1 Transducer
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Figure 38: Monitor MENU Structure
Entering Pressure Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Figure 39: Monitor MENU Structure
Set RPM
Set RPM Exit
Set RPM Decrease
Set RPM Decrease
Set RPM
[Start|Stop|Reset]
Set RPM
Stop Watch 2
Set RPM
Set RPM
Set RPM Exit
Set RPM
[Previous|Cal P2]
Set RPM Decrease
Set RPM Decrease
Set RPM Decrease
Set RPM Decrease
Increase
Increase
Enter
[Start|Stop|Reset]
Stop Watch 1
Enter
Return
[New|Cal P1]
Increase
Increase
Increase
Increase
Page 68 of 126