Changing The Flow Recorder Speed - Abbott CentriMag Operation Manual

7.17 Changing the flow recorder speed

The flow recorder function is only available via the Monitor.
Extended Menu
Pressure Display
Speed Step Resolution
Flow Range
Flow Limit Sensitivity
Flow Recorder Speed*
Support Type
Language
Data Logger*
Copy Data*
Management*
* Monitor only
The System allows the user to alter the speed of the moving flow graph displayed on the
bottom of the Monitor screen. The available speeds are 2 minutes and 20 seconds. The
speed changes the amount of time taken to fill one screen with flow data; changing this
parameter allows the user to see flow trends over different time periods.
To change between the available options, depress the MENU button until the EXTENDED
MENU option is displayed and then use the MENU key to scroll through the menu options
until the RECORDER SPEED option is displayed. Select between the two available
options using the arrow keys.
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Figure 45: Monitor MENU Structure
Changing the flow recorder speed
Set RPM
Set RPM Exit
Set RPM Inactive
Fine
Set RPM
(50 rpm)
Reduced
Set RPM
(0 – 3 lpm)
Set RPM Sensitive
Slow
Set RPM
(2 min)
Set RPM L
Set RPM Select
Set RPM
Set RPM
[Execute|Cancel]
Set RPM
[Start|Cancel]
Return
Active
Normal
(100 rpm)
Normal
(0 – 10 lpm)
Normal
Fast
(20 sec)
R
Next
Enter
[ |Confirm]
[ |Confirm]
Page 74 of 126