Accessing The Monitor Management Application - Abbott CentriMag Operation Manual

Circulatory support system
Hide thumbs Also See for CentriMag:
Table of Contents

Advertisement

7.25 Accessing the Monitor Management Application

Extended Menu
Pressure Display
Speed Step Resolution
Flow Range
Flow Limit Sensitivity
Flow Recorder Speed*
Support Type
Language
Data Logger*
Copy Data*
Management*
* Monitor only
The Monitor has a Management Application which allows users to change options,
including time and date, as well as retrieve information about the software version installed
on the Monitor.
To access the MANAGEMENT Application, depress the Menu keypad and scroll down to
the MANAGEMENT entry. Select START and CONFIRM using the UP and DOWN
arrows. The Monitor will reboot and display the words "MANAGEMENT. LOADING
APPLICATION...". Note: The rebooting sequence will only restart the Monitor, and not the
Console.
One other option to access the Management Application is to hold down the MENU key
while the Monitor is being connected to the Console. The system will display the words
"MANAGEMENT. LOADING APPLICATION...".
The Management Application has a menu on the left side and an Information Panel on the
right side. Menu items are accessible with the MENU key.
1) Time & Date Menu:
This menu item allows users to set the System time and date. This is essential for
ensuring that the System data logger is recording data with the correct timestamps.
On the "Time & Date Menu" press the UP key to enter the sub menu. In the sub menu,
time/date can be changed by using the MENU key (selection) and UP key (increase) or
DOWN key (decrease).
TM
CentriMag
Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Figure 53: Monitor MENU Structure
Starting Management Application
Set RPM
Set RPM
Exit
Set RPM
Inactive
Fine
Set RPM
(50 rpm)
Reduced
Set RPM
(0 – 3 lpm)
Set RPM
Sensitive
Slow
Set RPM
(2 min)
Set RPM
L
Set RPM
Select
Set RPM
Set RPM
[Execute|Cancel]
Set RPM
[Start|Cancel]
Return
Active
Normal
(100 rpm)
Normal
(0 – 10 lpm)
Normal
Fast
(20 sec)
R
Next
Enter
[
|Confirm]
[
|Confirm]
Page 84 of 126

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents