Appendix Iii - Electromagnetic Emissions - Abbott CentriMag Operation Manual

12.3 Appendix III – Electromagnetic Emissions
Guidance and manufacturer's declaration – electromagnetic emissions
The CentriMag Circulatory Support System with 2
use in the electromagnetic environment specified below. The customer or the user of the CentriMag Circulatory
Support System should assure that it is used in such an environment.
Emissions Test
RF emissions
CISPR11
RF emissions
CISPR11
Harmonic emissions
IEC 61000-3-2
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott– Document No PL-0047, Rev 11 (December 2019)
Generation CentriMag Console and Mag Monitor is intended for
nd
Compliance Electromagnetic environment - guidance
The System uses RF energy only for its internal function.
Group 1 Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class A
The System is suitable for use in all establishments other than
Class A
domestic and those directly connected to the public low-
voltage power supply network that supplies buildings used for
domestic purposes.
Complies
Page 122 of 126