Copy Logger Data To A Usb Memory Stick - Abbott CentriMag Operation Manual

7.23 Copy Logger Data to a USB Memory Stick

Extended Menu
Pressure Display
Speed Step Resolution
Flow Range
Flow Limit Sensitivity
Flow Recorder Speed*
Support Type
Language
Data Logger*
Copy Data*
Management*
* Monitor only
The logger data may be copied to a USB Memory Stick. A new session is started every
time the Console is switched ON.
Connect a USB Memory Stick to the USB Port of the Monitor. A connected Memory Stick
is indicated with a USB Stick Icon in the status bar on the Monitor (left of the date/time
indication).
WARNING
Only USB-compatible Memory Sticks may be used with the Monitor. No other
USB devices may be used (e.g. printer) with the Monitor.
To access the COPY DATA command from the Monitor menu, depress the Menu keypad
and scroll down to the COPY DATA entry. Select EXECUTE and CONFIRM using the UP
and DOWN arrows. The logger data copy process will be initiated. This is indicated with a
blinking USB Memory Stick Icon in the status bar on the Monitor (left of the date/time
indication). Wait until the Icon stops blinking. The USB Stick can now be disconnected,
and the data are ready for further processing (e.g. Mag Log Converter).
The Logger Data is stored on the USB Memory Stick in the "log" folder.
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Figure 52: Monitor MENU Structure
Copy Data
Set RPM
Set RPM Exit
Set RPM Inactive
Fine
Set RPM
(50 rpm)
Reduced
Set RPM
(0 – 3 lpm)
Set RPM Sensitive
Slow
Set RPM
(2 min)
Set RPM L
Set RPM Select
Set RPM
Set RPM
[Execute|Cancel]
Set RPM
[Start|Cancel]
Return
Active
Normal
(100 rpm)
Normal
(0 – 10 lpm)
Normal
Fast
(20 sec)
R
Next
Enter
[ |Confirm]
[ |Confirm]
Page 82 of 126