Motor Mounting - Abbott CentriMag Operation Manual

CAUTION
The vertical pole or the edge of the solid surface used to mount the Monitor has
to be stable. Mounting the Monitor to unstable objects may lead to personal
injury and/or property damage.
CAUTION
Do not mount the Monitor Arm on a horizontal pole to avoid injury or damage to
the equipment. Mount the Monitor Arm only on vertical poles or on the edge of
solid surfaces.
Figure 28: Do not mount the Monitor Arm on a horizontal pole

7.4 Motor Mounting

It is crucial that the Motor is securely fixed to a solid object. This can be achieved with the
Motor Bracket provided by Abbott Medical. The Motor Bracket can be mounted on a
vertical pole.
7.4.1 Steps required to setup the Motor Bracket and the Motor:
1. To mount the Motor Bracket on a vertical pole, use the star screw attached to the
clamp of the Motor Bracket. The star screw can be screwed by hand to allow for easy
removal of the Motor Bracket. Make sure the screws are sufficiently tightened.
TM
CentriMag Circulatory Support System Operation Manual (US)
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Page 57 of 126