Homeposition Adjustment - ACME Dotline360 TB-1230 QW User Manual

to select All, or
Tilt Zoom
All — Reset All
Select All, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the unit will
run built-in program to reset all motors to their home positions) or No, press ENTER button to
store. Press the MENU button to exit.
Tilt —Reset Tilt
Select Tilt, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the unit
will run built-in program to reset tilt to their home positions) or No(normal), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Zoom —Reset Zoom
Select Zoom, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the unit
will run built-in program to reset Zoom to their home positions) or No, press the ENTER button to
store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Factory Setting
To select Factory Setting , press the ENTER button to show Factory Setting on the display. Press the
ENTER button and the unit will Reset to Factory Defaults. To go back to the functions press the MENU
button again.

3.3 HomePosition Adjustment

Press the MENU button into menu mode, then press the ENTER button for about 3 seconds into offset
mode to adjust the home position. Select the function by the ENTER button. Use the UP/DOWN button
to choose the submenu, press the ENTER button to store and automatically return to the last menu.
Press MENU button to exit.
.
13B