ACME Dotline360 TB-1230 QW User Manual page 12

Bl.O. Tilt Moving
To select Bl.O. Tilt Moving, press the ENTER button to confirm. Use the UP/DOWN button to select
Disable or Enable, press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
Fan Mode
To select Fan Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Auto or
Silent, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Auto Test
To select AUTO TEST, press the ENTER button to show AUTO TEST on the display and the unit will run a
self-test . To go back to the functions without any changes press the MENU button again. Press and hold
the MENU button for about one second or wait for 7 seconds to exit the current mode.
Manual Mode
To select Manual Mode, press the ENTER button to show Manual Mode on the display. Use the
DOWN/UP button to select Tilt, Dimmer, Strobe, Red, Green, Blue, White or Zoom on the display. Once
the mode has been selected, press the ENTER button to confirm. Use the DOWN/UP buttons to specify a
value for the chosen effect from 0 to 255. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the menu mode.
Display Settings
To select Display Settings ,press the ENTER button to confirm, use the UP/DOWN button to select
Inverse, Language, Temperature Unit or Display Warning.
Inverse
To select Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
11B
or ,
No Yes