ACME Dotline360 TB-1230 QW User Manual page 11

Optically Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-cure:
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select Dimmer Speed, press the ENTER button to confirm. Use the UP/DOWN button to select
Smooth or , press the ENTER button to store. Press the MENU button back to the last menu or
Fast
let the unit idle one minute to exit menu mode.
Invert Tilt
To select Invert Tilt, press the ENTER button to confirm. Use the UP/DOWN button to select Disable
or Enable, press the ENTER button to store. Press the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
Tilt Feedback
To select Tilt Feedback, press the ENTER button to confirm. Use the UP/DOWN button to select
Disable or Enable, press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
10B