ACME Dotline360 TB-1230 QW User Manual page 10

DMX Last State
To select DMX Last State , press the ENTER button to show DMX Last State on the display. Use the
DOWN/UP buttons to select
button to setup. To go back to the functions without any changes press the MENU button again. Press
and hold the MENU button for about one second or wait for 7 seconds to exit the menu mode.
Fixture Setting
To select Fixture Setting, press the ENTER button to show Fixture Setting on the display. Use the
DOWN/UP buttons to select Light Mode
Tilt Moving or Fan Mode. Once the mode has been selected, press the ENTER button to setup. To go
back to the functions without any changes press the MENU button again. Press and hold the MENU
button for about one second or wait for 7 seconds to exit the current mode.
Light Mode
To select Light Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Color
Calibration or Max, press the ENTER button to store. When choose Color Calibration, use the
UP/DOWN button to select
，use the UP/DOWN button to select
White Balance
to the last menu or let the unit idle one minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to show the DIMMER CURVE on the display. Use
the DOWN/UP button to select the
Once the mode has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Press and hold the MENU button about one
second or wait for one minute to exit the menu mode.
or
Black Out, Hold Manu
Dimmer Curve
,
or
Disable Enable
Optically Linear
, Once the mode has been selected, press the ENTER
Dimmer Speed
,
. When choose Max, press the ENTER button to enter
, or
Red Green
or
Square Law
9B
Invert Tilt Tilt Feedback
, ,
. Press the MENU button back
Blue
or
Inverse Square Law
Bl.O.
,
or .
S-Curve