Table of Contents
Advertisement
Start Here Guide
What You Require
•
A computer monitor for the server platform.
•
For a Digital integration: available DNI ports on the private branch exchange (PBX)
and connection to a 25-pair amphenol connector.
•
For an IP integration: the same number of device licenses as there are speech ports.
•
For a Q.SIG integration: a T1 or an E1 primary rate interface (PRI) card, a PRI Interface
Assembly, and integrated services digital network (ISDN) Release 8 software.
•
For Voice Profile for Internet Messaging (VPIM) integration: Mitel Networks
NuPoint Messenger™ Release 7.0 RSD 3 (or greater) software on the
NuPoint Messenger server, in the network.
•
Unified Messaging requires Microsoft
Microsoft Outlook XP. The Mitel Networks 6500 Multimedia Outlook Plug-in requires
Microsoft Outlook 2000 or Microsoft Outlook XP.
•
Unified Messaging requires a Microsoft Windows 2000 infrastructure that is comprised
of an Exchange 2000 server with Service Pack 2 or greater, and a Domain Controller.
We recommend that this environment be in place and be used by the targeted
6500 Unified Messaging site for a minimum of two weeks prior to installing the
6500 Unified Messaging. Mitel Networks recommends that you position the 6500
server, the Exchange server, and the Domain Controller server on the same
100-megabit network segment for optimum performance.
•
The 3300 ICP and the 6500 server should be on the same virtual local area network
(VLAN).
PBX Software Requirements
•
Mitel Networks SX-200
•
Mitel Networks SX-2000
•
Mitel Networks 3200 Integrated Communications Platform - Release 2.1.1.27 or greater
•
Mitel Networks 3300 ICP - Release 3.1 UR2 or greater
•
Nortel Networks™ Meridian (M-1 and SL-1) - Release 15 or greater
2
®
Outlook 98, Microsoft Outlook 2000, or
®
- LIGHTWARE™ 17 or greater
®
- LIGHTWARE 30 or greater
56004892, Revision A
Advertisement
Table of Contents
