Eaton PowerXL DC1 Manual page 29

Variable frequency drive
Hide thumbs Also See for PowerXL DC1:
Table of Contents

Advertisement

4 Operation
4.1 Checklist for commissioning
No. Activity
1
Mounting and wiring have been carried out as required
by the corresponding instructional leaflet (→ IL04020009Z,
IL04020013Z).
2
All wiring and line section leftovers, as well as all the tools
used, have been removed from the variable frequency drive's
proximity.
3
All connection terminals in the power section and in the control
section were tightened with the specified torque.
4
The lines connected to the output terminals (U, V, W, DC+,
DC-, BR) of the variable frequency drive are not short-circuited
and are not connected to earth (PE).
5
The variable frequency drive has been earthed properly (PE).
6
All electrical connections in the power section (L1/L, L2/N, L3,
U, V, W, DC+, DC-, BR, PE) have been connected properly
while taking into account the degree of protection and have
been dimensioned in line with the corresponding require-
ments.
Each single phase of the supply voltage (L or L1, L2, L3) is
7
protected with a fuse.
The variable frequency drive and the motor are adapted to the
8
mains voltage.
(→ Section 1.4.1, „Rated operational data on the nameplate",
page 15, connection type (star, delta) of the motor tested).
The quality and volume of cooling air are in line with the
9
environmental conditions required for the variable frequency
drive and the motor.
10
All connected control cables comply with the corresponding
stop conditions (e.g., switch in OFF position and setpoint
value= zero).
11
The parameters that were preset at the factory have been
checked with the list of parameters (→ Table 37, page 221).
The effective direction of a coupled machine will allow the
12
motor to start.
All emergency switching off functions and safety functions are
13
in an appropriate condition.
Before placing the frequency converter into operation, use the checklist
below to make sure that all the following requirements are met:
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
4.1 Checklist for commissioning
Notes
4 Operation
83

Advertisement

Table of Contents
loading

Table of Contents