About These Instructions; Scope; Symbols Used; Warnings In Operating Instructions - Sartorius Cubis MCA Series Operating Instructions Manual

1

About these Instructions

1.1

Scope

These instructions are part of the device . These instructions apply to the device in the
following versions:
Device
Ultramicrobalance and microbalance
with motorized draft shield
Filter Ultramicrobalances and
Microbalances
1.2

Symbols Used

1.2.1

Warnings in Operating Instructions

WARNING
Denotes a danger with the risk that death or severe injury may result if it is not
avoided .
CAUTION
Denotes a hazard that may result in moderate or minor injury if it is not avoided .
NOTICE
Denotes a danger with the risk that property damage may result if it is not avoided .
1.2.2

Other Symbols

Required action: Describes actions which must be carried out .
t
Result: Describes the result of the actions carried out .
y
[ ] Text inside brackets refers to control and display items .
[ ] Text inside brackets indicates status, warning, and error messages .
Indicates information for legal metrology for conformity-assessed
(verified) devices . Conformity-assessed devices are also referred to as
"verified" in these instructions .
Figures on the Operating Display
The figures on the operating display of the device may deviate from those in these
instructions .
About these Instructions
Model
MCA10 .6S . . .-M | MCA2 .7S . . .-M |
MCA3 .6P . . .-M | MCA6 .6S . . .-M
MCA10 .6S . . .-F | MCA2 .7S . . .-F |
MCA6 .6S . . .-F
Cubis ® MCA Operating Instructions 5