Accessories; Printers And Communication; Displays And Input / Output Elements - Sartorius Cubis MCA Series Operating Instructions Manual

Accessories

76 Cubis ® MCA Operating Instructions
16 Accessories
16.1 Accessories
This table contains an excerpt of the accessories that can be ordered . For information
on other products, contact Sartorius .

16.1.1 Printers and Communication

Item
Thermal transfer | thermal printer for GLP / GMP
printouts on continuous paper and labels
Standard paper and ink ribbon, set, 90 m, for YDP30
Self-adhesive paper and ink ribbon, 90 m, for YDP30 1
Standard thermal paper, 24 m roll, for YDP30 | YDP40 5
Self-adhesive thermal paper, 13 m roll, for YDP30
Self-adhesive labels for YDP30
58 mm × 100 mm
58 mm × 76 mm
58 mm × 30 mm
Display cable, 3 m, for separate installation of display
and weighing units, installation by Sartorius Service
or at the factory (order code VF4016)
Installation of display cable, 3 m, for separate
installation of display and weighing units
Cable, 3 m, between the weighing module and
electronics module for semi-microbalance
RS232C connection cable, 9-pin, 3 m, for connection
to a PC with 9-pin COM interface
Sartorius Wedge, software for data communication
between the PC and balance

16.1.2 Displays and Input / Output Elements

Item
Display and control unit with color TFT display,
touch screen, and keys
Motion sensor for triggering a maximum of
4 functions via gesture control, selection via menu
Quantity Order number
1 YDP30
1 69Y03285
69Y03286
69Y03287
5 69Y03288
350 69Y03094
500 69Y03093
1000 69Y03092
1 On request
1 VF4016
1 YCC01-MSM3
1 On request
1 YSW02
Quantity Order number
1 YAC01MCE
1 YHS02MS