Sartorius Cubis MCA Series Operating Instructions Manual page 46

System Settings
Parameters in the "isoCAL" Submenu
Parameters Configuration values
isoCAL function Off
Info, manual execution
On, automatic execution*
On, automatic execution
with linearization
isoCAL alert levels Low: For information only
Medium: Warning message* If the isoCAL function must be carried out: The device displays a warning
High: Error message,
adjustment mandatory
* Factory setting
Parameters in the "Device ID" Submenu
Parameters Configuration values
ID 1 User input
ID 2 User input
* Factory setting
Parameters in the "Draft Shield" Submenu (Only for Devices with a Motorized Draft Shield)
Parameters Configuration values
Left/right key Off, no function
Same function
Separate function*
Sensor mode Proximity sensor
(one-hand operation)*
Crossover method
(two-hand operation)
* Factory setting
46 Cubis ® MCA Operating Instructions
Explanation
Deactivates the isoCAL function . This setting change is not available for all
models .
If the device must be calibrated: The [isoCAL] button is displayed as the
predominant button in the operating display . The isoCAL function must be
manually triggered using the [isoCAL] button .
Activates the isoCAL function . The device is automatically adjusted as soon
as a trigger starts the isoCAL function .
Activates the isoCAL and linearization function . The device is automatically
adjusted and then linearized as soon as a trigger starts the isoCAL function .
If the isoCAL function must be carried out: The device displays a status
message .
message . Some device functions are limited until the device is leveled:
The displayed weight value is marked as invalid; printed data are marked
with [!] .
If the isoCAL function must be carried out: The device displays an error
message . Some device functions are limited until the device is leveled:
The displayed weight value is marked as invalid; the starting of functions
and saving of data in tasks is disabled; data output is deactivated .
Explanation
Saves the entered device ID .
Saves the entered device ID .
Explanation
Deactivates the function for both palm-operated keys .
Assigns the same function to the palm-operated keys . The two palm-
operated keys cannot be assigned functions independently of each other .
Assigns separate functions to the palm-operated keys . The two palm-
operated keys can be assigned functions independently of each other .
If a sensor window detects something approaching: Opens and closes
the draft shield automatically on the side on which the motion sensor
detected something approaching and locks the function of the second
sensor window .
If a sensor window detects something approaching: Opens and closes the
draft shield automatically on the opposite side and locks the function of
the second sensor window .