Displays On The Weighing Module; Motorized Draft Shield; Sensor Area; Operating Elements For The Draft Shield - Sartorius Cubis MCA Series Operating Instructions Manual

Device Description
14 Cubis ® MCA Operating Instructions
3.7

Displays on the Weighing Module

Fig . 7: Displays on the weighing module (example)
Pos. Designation Description
1 LED strip Used for lighting of weighing chamber . The intensity of the
lighting can be adjusted in the menu . When the control unit
displays an error message: The LED strip is illuminated in
orange .
3.8

Motorized Draft Shield

3.8.1

Sensor Area

The device has a motion sensor that opens the draft shield automatically as soon as
a motion is detected within the sensor area . Following that the draft shield will be
automatically closed again . The operation is optimized for left- and right-handed
users due to the motion sensor .
The motion sensor has a right and a left sensor window .
The motion sensor has two modes:
− Proximity sensor (one-hand operation)
− Crossover method (two-hand operation)
The motion sensor sensitivity can be adjusted in steps (see Chapter "Parameters in
the "Draft Shield" Submenu (Only for Devices with a Motorized Draft Shield)",
page 46) .
3.8.2

Operating Elements for the Draft Shield

The draft shield can be opened and closed via the palm-operated key . Operation via
the palm-operated key enables the opening and closing of the draft shield as well as
the activation and deactivation of the motion sensor .
3.9

Conformity-assessed Devices

Some settings of conformity-assessed models are protected against user changes,
e .g . "external calibration" for devices in accuracy class II . This measure is intended
to ensure the suitability of the devices for use in legal metrology .
1