Sartorius Cubis MCA Series Operating Instructions Manual page 31

Level 1 Level 2
Connections Website for the balance Website
Interfaces
SBI protocol
PC direct protocol
Connected devices
Device Update firmware
maintenance
Update QAPP center
Export options
Import options
Restore factory default
settings
Level 3
Remote control display
Serial transmission via Ethernet Display the profiles for the Ethernet connection .
USB-B connection
RS232 connection
Format
Output
Automatic data output
Output
Decimal marker of readout
Motion sensor
External USB switch
Operating Concept
Description
Determines the settings for the display of the
website for the device .
Define the settings for controlling the device
remotely .
Edit, create or delete the profiles .
Display the profiles for the USB-B connection .
Edit, create or delete the profiles .
Display the profiles for the RS232 connection .
Edit, create or delete the profiles .
Configure the settings for the data output and
data output format .
Define whether the output takes place with or
without stability .
Activate or deactivate the output rate for
automatic data output .
Define the output format for the data exchange
between the balance and the PC .
Define the decimal separator character .
Define the number and function of the gestures
and the sensitivity .
Only available if a motion sensor is connected to
the device .
For keys 1–3 on the USB switch, determine which
functions are executed when the keys are pressed
and released .
Only available if an external USB switch is
connected to the device .
Update the firmware . The menu is not available
for conformity-assessed devices .
Update the QAPP center .
Determine the settings for exporting data from
the device .
Determine the settings for importing data to the
device .
Reset the device to factory settings .
Cubis ® MCA Operating Instructions 31