Installing O-Ring To Clear Dome; Installing Base Unit And Main Unit - Sanyo VCC-9300 Mechanism Service Technical Information

20. Installing O-Ring to Clear dome

20-1. Install O-Ring 60 to Clear dome 28 .

21. Installing Base unit and Main unit

21-1. Install Safety wire ass'y 154 to Main unit.
21-1-1. Pull out the ball of Safety wire ass'y 154 of Base unit, then set it into the groove inside of Main unit as shown.
21-1-2. Move Safety wire ass'y 154 along with the groove.
21-1-3. Pull up on Safety wire ass'y 154 to lock.
21-2. Install Main unit to Base unit.
21-2-1. Make the alighnment with Base unit, then push up Main unit as possible.
21-2-2. Turn Main unit clockwise 10 degree, then verify that Stopper is locked.
Base unit
Main unit
3
1
2
154
Safety
wire ass'y
Figure of Step 20-1
Figure of Step 21-1
–45–
60
O-Ring
28
Clear dome
19
Stopper
Figure of Step 21-2