3. Installing Slip ring ass'y
3-1.
Install the unit reassembled in Step 1-3 (Slip ring) to the unit reassembled in Step 2-4, then tighten Screws 101 (x3) .
Torque: 75.6 CN.m (7.7kgf.cm)
Apply Screw lock after tightening screws.
Note1: Keep the unit reassembled in Step 1-3 (Slip ring) pressing to the direction of the arrow to secure with the
screws.
The unit reassembled
in Step 1-3
Figure 1 of Step 3-1
Keep pressing towards
the direction of the arrow
to secure with the screws.
101
308
Screw lock
(x3)
–24–
Screws
3x10 mm (x3)
Figure 2 and Caution of Step 3-1
101