Preparing The Camera; Installing The Batteries - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

PREPARING THE CAMERA

Installing the Batteries

You can use 2 AA size batteries (Ni-MH rechargeable or alkaline) to power the camera. Make sure that
the power of the digital camera is off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery cover.
To remove the batteries, turn the camera off before removing
batteries and hold the camera with the battery cover facing
upward, then open the battery cover.
• Be careful not to drop the batteries when opening or closing the battery cover.
• Due to the characteristics of AA alkaline battery, camera performance may deteriorate. AA alkaline
battery is not recommended except in emergencies and checking the camera's functionality.
EN-18