Table of Contents
Advertisement
8. Installing Frame A and Supporter
8-1.
Install Frame A 9 to the unit reassembled in Step 7-1, then tighten Screws 102 (x2).
Torque: 43.2 cN•m (4.4 kgf•cm)
Apply Screw lock after tightening screws.
Note1: Install Frame A 9 as it comes to the center as possible.
Figure of Step 8-1
8-2.
Install Frame A 9 and Frame B 10 , then tighten Screws 103 (x2).
Note: Keep Frame B 10 pressing towards the direction of the arrow to secure with Screws 103 (x2).
Torque: 43.2 cN•m (4.4 kgf•cm)
Apply Screw lock after tightening screws.
8-3.
Install Supporter 13 to the unit assembled in Step 8-2, then tighten Screws 102 (x2).
Torque: 43.2 cN•m (4.4 kgf•cm)
Apply Screw lock after tightening screws.
308
Screw lock
(x2)
103
Screws
2.6x3 mm
(x2)
10
Frame B
Keep pressing towards
the direction of the arrows
to secure with the screws.
308
Screw lock
(x2)
9
Frame A
The unit reassembled in Step 7-1
103
Figure of Step 8-2
102
Screws
2.6x4 mm
(x2)
Install so as to be in
the center.
13
Supporter
9
Frame A
–28–
010635003
Caution for Step 8-1
102
Screws
2.6x4 mm (x2)
308
Screw lock
(x2)
Figure of Step 8-3
Advertisement
Table of Contents
