1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Digital Camera
  5. Xacti VPC-C5
  6. Service manual

Sanyo VPC-C5 Service Manual

Hide thumbs Also See for VPC-C5:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
SERVICE MANUAL
Digital Movie Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY ........................................................ 11
3. ELECTRICAL ADJUSTMENT .................................. 15
REGISTRATION ...................................................... 22
5. TROUBLESHOOTING GUIDE ................................. 23
6. PARTS LIST ............................................................. 24
CABINET & CHASSIS PARTS 1 ............................. 24
ELECTRICAL PARTS .............................................. 28
PACKING MATERIALS ............................................ 32
ACCESSORIES ....................................................... 32
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...................................... C1
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part
designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SX719/U, EX, E, U2, GX, EX2, EX3, GX2, GX3, U4
PRODUCT SAFETY NOTICE
FILE NO.
VPC-C5
(Product Code : 126 697 01)
(U.S.A., Canada, Korea, Taiwan)
VPC-C5EX
(Product Code : 126 697 02)
(Europe)
VPC-C5E
(Product Code : 126 697 03)
(U.K., Hong Kong)
VPC-C5BR
(Product Code : 126 697 04)
(U.S.A.)
VPC-C5GX
(Product Code : 126 697 05)
(General)
VPC-C5EXBR
(Product Code : 126 697 08)
(Europe)
VPC-C5EXW
(Product Code : 126 697 09)
(Europe)
VPC-C5GXBR
(Product Code : 126 697 10)
(General)
VPC-C5GXW
(Product Code : 126 697 11)
(General)
VPC-C5BL
(Product Code : 126 697 12)
(U.S.A.)
REFERENCE No. SM5310613

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VPC-C5

Summary of Contents for Sanyo VPC-C5

  • Page 1: Table Of Contents

    FILE NO. SERVICE MANUAL VPC-C5 (Product Code : 126 697 01) Digital Movie Camera (U.S.A., Canada, Korea, Taiwan) VPC-C5EX (Product Code : 126 697 02) (Europe) VPC-C5E (Product Code : 126 697 03) (U.K., Hong Kong) VPC-C5BR (Product Code : 126 697 04) (U.S.A.)

  • Page 2: Outline Of Circuit Description

    1. OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA1 CIRCUIT DESCRIPTION 1. IC Configuration IC901 (ICX495BQF) CCD imager IC905 (AD9949KCPZ) H driver, CDS, AGC and A/D converter 2. IC901 (CCD imager) [Structure] Interline type CCD image sensor Image size Diagonal 7.19 mm (1/2.5 type) Pixels in total 2668 (H) x 1970 (V) Recording pixels...
  • Page 3 3. IC902, IC903 (V Driver) and IC905 (H driver) 4. IC905 (CDS, AGC Circuit and A/D Converter) An H driver and V driver are necessary in order to generate The video signal which is output from the CCD is input to Pin the clocks (vertical transfer clock, horizontal transfer clock and (27) of IC905.
  • Page 4 1-2. CP1, VF1 and TB1 CIRCUIT DESCRIPTION 1. Circuit Description When the TG/SG drives the CCD, picture data passes through 1-1. Digital clamp the A/D and CDS, and is then input to the ASIC as 10-bit The optical black section of the CCD extracts averaged val- data.
  • Page 5 4. Lens drive block 5. Video clip recording and playback 4-1. Focus drive 5-1. Recording The focusing motor is a stepping motor that is microprocessor The signals from the camera block are input to the ASIC where driven by IC951. When input the control signal (FCW, FOE they are processed, and the image data that is stored in the and FCLK) which are output from the ASIC port (IC101), the SDRAM built-in IC101 is input to the IC102 MPEG4 CODEC...
  • Page 6 1-3. PWA and VF1 POWER CIRCUIT DESCRIPTION 1-4. Analog 3.4 V Power output 1. Outline (PWA) +3.4 V (A) is output. +3.4 V (A) is output which dropped 3.4 V This is the main power circuit, and is comprised of the follow- by 5V system power output at regulator IC503.
  • Page 7 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When FLCLT signal is input from the ASIC expansion port, CHG signal from microprocessor becomes High (3.3 V), the the stroboscope emits light.
  • Page 8 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
  • Page 9 Card detection (L=card) /CARD AD VREF ON/OFF signal (L=ON) /AVREF ON PLLEN ASIC PLL oscillation ON/OFF /ASIC TEST ASIC control signal (ZTEST) 51~56 /SCAN IN 5~0 Key scan input 5~0 /DC_IN DC adaptor connection detection (L=DC adaptor) AV JACK AV JACK connection detection (H=AV JACK detection) BAT_TEMP Battery temperature (analog) INT_TEMP...
  • Page 10 4. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scanning is carried out even when the power switch is turned off, so that the camera can start up again.

  • Page 11: Disassembly

    2. DISASSEMBLY 2-1. REMOVAL OF CABINET LEFT, CP1 BOARD AND TB1 BOARD 1. Open the cover battery. 13. Screw 1.7 x 4 22. Dec grip front 2. Screw 1.7 x 3 14. Connector 23. Two FPCs 3. Screw 1.7 x 4.5 15.
  • Page 12 2-2. REMOVAL OF CABINET FRONT, ST1 BOARD AND CA1 BOARD 1. Assy lens 2. Cabinet front 3. Screw 1.7 x 4 4. FPC 5. Remove the solder. 6. ST1 board 7. Three screws 1.4 x 3.5 8. CA1 board 9. Unit control When assembling, tighten the screws order.
  • Page 13 2-3. REMOVAL OF CABINET RIGHT, LCD AND VF1 BOARD 10. Four screws 1.4 x 2.5 1. Button power 2. Two screws 1.7 x 2.5 11. Cover LCD back 3. Spring button 12. Assy wire VF1 & CP1-1 4. Button LCD 13.
  • Page 14 2-4. BOARD LOCATION CA1 board VF1 board ST1 board TB1 board CP1 board – 14 –...

  • Page 15: Electrical Adjustment

    3. ELECTRICAL ADJUSTMENT 4. AWB Adjustment 3-1. Table for Servicing Tools 5. CCD White Point Defect Detect Adjustment Part code 6. CCD Black Point And White Point Defect Detect Ref. No. Name Number Adjustment In Lighted Pattern box (color viewer) VJ8-0190 7.
  • Page 16 3-5. Connecting the camera to the computer 1. Turn on the camera. 2. Line up the arrow on the cable connector with the notch on the camera's USB port. Insert the connector. 3. Locate a USB port on your computer. 4.
  • Page 17 2. Iris Adjustment 3-6. Adjust Specifications [CP1 board (Side B)] TP971 Measuring Point Measuring Equipment Digital voltmeter Calibration Upload RGB Odd RGB Even VCOMPP(LOW) TP971 Firmware Focus RGB Gain VCOMDC VCOMPP(HI) Data UV Matrix Tint Phase Cal Mode Initialize Hall Cal. H AFC Test Cal Data...
  • Page 18 3. Lens Adjustment 3-2. Collimator Adjustment 3-1. 1m Siemen Star Chart Adjustment (Choose either 3-1. or 3-2.) Camera Camera Collimator 100 cm 3 cm (Set up to the infinty.) Siemen star chart Preparation: POWER switch: ON Preparation: Set up the collimator to the infinity. POWER switch: ON Note: Adjustment condition:...
  • Page 19 4. AWB Adjustment Adjustment value determination 150<a1<270, 300<a2<450, 450<a3<650, 600<a4<850, 750<a5<1024 wc0=128±2, wc1=128±2, wc2=130±40 1400<=MS1<=2500, 1700<=MS2<=2900 1800<=MS3<=3100, 2300<=MS4<=3600 105<=s1<=200, 105<=s2<=200, 105<=s3<=200, 105<=s4<=200, 105<=s5<=200 s1>s2>s3>s4>s5 Adjustment values other than the above are irrelevant. 5. CCD White Point Defect Detect Adjustment Preparation: POWER switch: ON Camera Adjustment method:...
  • Page 20 7. LCD Panel Adjustment 3-7. Factory Code Setting 1. Check the "Factory Code" display within the Setting group. [VF1 board (Side B)] 2. For U.S.A., Canada and NTSC general area If "FC_SANYO_U" does not appear, click on the " " mark located on the right of the "Factory Code"...
  • Page 21 3-9. Firmware uploading procedure 2. Overwriting firmware from the calibration software 1. Uploading the firmware should be carried out if the version Preparation: number (COMPL PWB XX-X) on the replacement circuit PC with overwriting firmware copied to the preferred folder in board is lower than the version of the distributed firmware.

  • Page 22: Usb Storage Information Registration

    16.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: C5 Serial: Rev. : 1.00 4.

  • Page 23: Troubleshooting Guide

    5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER PUSH THE POWER BUTTON SW FOR A WHILE IC301-53, 52 CHECK UNIT IC301-42 CHECK S3102 (SCAN IN 3, 4) CONTROL PANEL, (SCAN OUT2) PULSE INPUT D3112, D3111 PULSE INPUT CL531, CL532 CHECK IC301, IC302-7 4.8 V CHECK TB1, IC955,...

  • Page 24: Parts List

    CABINET & CHASSIS PARTS 1 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION 636 087 7498 CABINET LEFT-SX719/J, 636 083 0431 STAND-SX719/J,, VPC-C5,VPC-C5EX,VPC-C5E,VPC-C5GX VPC-C5,VPC-C5EX,VPC-C5E,VPC-C5GX 636 085 9708 CABINET LEFT-SX719/J2, 636 086 0070 STAND-SX719/J2, VPC-C5BR,VPC-C5EXBR,VPC-C5GXBR VPC-C5BR,VPC-C5EXBR,VPC-C5GXBR 636 085 9715 CABINET LEFT-SX719/J3,...
  • Page 25 CABINET & CHASSIS PARTS 1 Y0080 5096 5070 5088 5072 5270 5089 5071 5084 5087 5071 5273 5091 Y0071 5075 5070 5074 5075 SX719/J Parts List1...

  • Page 26: Cabinet & Chassis Parts 2

    CABINET & CHASSIS PARTS 2 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION 636 083 1230 ASSY,BUTTON POWER-SX719/J, 636 083 0042 COVER JOINT BASE-SX719/J, VPC-C5,VPC-C5EX,VPC-C5E,VPC-C5GX VPC-C5,VPC-C5EX,VPC-C5E,VPC-C5GX 636 085 8954 ASSY,BUTTON POWER-SX719/J, 636 085 9647 COVER JOINT BASE-SX719/J2, VPC-C5BR,VPC-C5EXBR,VPC-C5GXBR VPC-C5BR,VPC-C5EXBR,VPC-C5GXBR 636 085 8961...
  • Page 27 CABINET & CHASSIS PARTS 2 5082 5093 5082 5079 5079 5077 5081 5086 5271 5083 SX719/J Parts List2...

  • Page 28: Electrical Parts

    ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 29 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION C1028 403 373 5908 CERAMIC 1000P K 16V C5020 403 381 8106 CERAMIC 1U K 6.3V C1029 403 382 3803 CERAMIC 0.01U K 10V C5021 403 415 8409 CERAMIC 10U M 4V C1030 403 382 3902 CERAMIC...
  • Page 30 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R3013 401 225 0408 MT-GLAZE 330K JA 1/16W (FILTER) R3014 401 226 1503 MT-GLAZE 0.000 ZA 1/16W XF901 645 057 0551 FILTER,EMI 1000000PF (N.S.P) R3015 401 226 1503 MT-GLAZE 0.000 ZA 1/16W (CAPACITORS) R3016 401 226 1503...
  • Page 31 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION (DIODES) R9517 401 225 7902 MT-GLAZE 220 JA 1/16W D3110 407 227 3102 DIODE EMP11 R9551 401 224 9303 MT-GLAZE 1K JA 1/16W D3111 407 227 3102 DIODE EMP11 R9552 401 224 8900 MT-GLAZE 100K JA 1/16W D3112 407 227 3102...

  • Page 32: Packing Materials

    645 063 5816 BATTERY,RECHARGE,LI-ION CN177 645 075 2056 PLUG,PWB-WIRE 10P(N.S.P) 645 063 9050 DISC,CD-ROM SSP 719 EX1 (N.S.P.) Sanyo Software Pack 7.2 Disk1 PDF of instruction manual:English,German,French, COMPL PWB,ST-1 Spanish,Dutch,Korean,Russian, Chinese(Traditional,Simplified) 636 083 2596 645 063 9067 DISC,CD-ROM SSP 719 EX2 (N.S.P.) Sanyo Software Pack 7.2 Disk2...
  • Page 33 6-1. Table of accessories...
  • Page 34 SANYO Electric Co., Ltd. Osaka, Japan Mar./’05 Printed in Japan...

This manual is also suitable for:

Vpc-c5eVpc-c5exVpc-c5brVpc-c5gxVpc-c5exbrVpc-c5exw ... Show all

Table of Contents