Table of Contents
Advertisement
6. Removing Slip ring ass'y
6-1.
Remove Screws 107 (x4), then remove Camera base 11 and Camera cover 5 .
This is the disassembling procedure after the disassembling of:
1. Removing Base unit: Page 9
2. Removing Rotation unit: Page 9
3. Removing Main board ass'y: Page 10
5. Removing Camera unit and Fan motor ass'y: Page 12
6-2.
Remove Pan belt (Synchro belt 140) 55 . Turn Pan belt (Synchro belt 140) 55 while lifting up on, so that you can
remove it easily.
6-3.
Remove Frame B 10 and Binder 63 using nipper.
6-4.
Remove Screws 102 (x2) and Screws 103 (x2), then remove Frame B 10 .
6-5.
Remove Screws 101 (x3), then remove Slip ring ass'y 151 .
55
103
Screws
2.6x3mm (x2)
63
Binder
102
Screws
2.6x4 mm (x4)
Refer to Step 3-1 on page 24, Step 4-2 through Step 4-4 on page 25, Steps 6-1 and 7-1 on page 27 and page 31
through page 34 for reassembling.
Figure of Step 6-1
Pan belt (Synchro belt 140)
63
Binder
10
Frame B
Figure of Steps 6-3 and 6-4
5
Camera cover
11
Camera base
107
Screws
3x8mm (x4)
107
Figure of Step 6-2
151
Slip ring ass'y
103
101
Figure of Step 6-4
–13–
101
Screws
3x10 mm (x3)
Advertisement
Table of Contents
