16-5. Cover Power supply 61 using Insulation plate 27 .
61
Power supply
Figure of Step 16-5
16-6. Install the unit reassembled in Step 16-5, then tighten Screws 111 (x4).
Torque: 75.6 cN•m (7.7 kgf•cm)
Apply Screw lock after tightening screws.
16-7. Install the connector of DC24V power cable ass'y 160 to CN1 of Power supply 61.
111
Screws 3x6 mm (x4)
308
Screw lock
(x4)
2
Base
Figure of Step 16-6
111
The unit reassembled
in Step 16-5
Connector of DC24V power cable ass'y 160
CN1
Figure of Step 16-7
–41–
27
Insulation plate
Side View