Preparing The Camera; Installing The Batteries - Sanyo VPC-S500EX Instruction Manual

PREPARING THE CAMERA

Installing the Batteries

You can use 2 AA size batteries (Ni-MH rechargeable or alkaline) to power the
camera. Make sure that the power of the digital camera is off before inserting or
removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as
shown in the illustration.
4. Close the battery cover.
To remove the batteries, turn the camera off
before removing batteries and hold the
camera with the battery cover facing upward,
then open the battery cover.
• Be careful not to drop the batteries when opening or closing the battery cover.
• Due to the characteristics of AA alkaline battery, camera performance may
deteriorate. AA alkaline battery is not recommended except in emergencies and
checking the camera's functionality.
EN-17